Samsung Galaxy
Victory 4G: DISASSEMBLING
PROCEDURE
Place
phone face down. Ensure the side with the display screen is not facing you.
Locate
battery door and slide open.
Remove
battery.
Remove
the 7 Phillips 3.93 mm labeled screws by using the Phillips #00 Precision
Screwdriver.
Use
the plastic opening tool to pry open the back cover.
Insert
the tool into the SD card slot and pry around the entire phone.
Remove
one Phillips 3.93 mm screw from bottom center of the phone.
Carefully
disconnect 3 ribbons at the shown location. To remove, place tool under the ribbon
and pull slowly to avoid tearing.
Pull
the motherboard back and out to the left. Make sure the motherboard is faced
straight up,
Place
your tool under the labeled area and pull gently to detach the ribbon cable
from the motherboard.
At
this point the motherboard should be completely detached from the rest of the
phone.
