Television system:
System I; Color system: PAL/NTSC4.43
(PAL/NTSC4.43/NTSC3.58 IN AV MODE)
Service Menu
With the set
turned ON, press the following sequence of buttons on the remote control:- [MENU, 3, 6, 0, 9]
The main
service menu will be displayed.
Model
Option:
B/S [Betting
Shop]: For models fitted with SCART and
TUNER
CCTV [Closed
Circuit TV]: For models fitted with BNC IN/OUT
Changing the model option will automatically
alter some of the settings to suit
the requirements of the application.
the requirements of the application.
Also some
menu's & options will not be accessible in the CCTV mode
Hotel Menu
Hotel mode
allows the owner to restrict the functionality of the set so that the user may
not tamper with settings such as channel tuning.
Volume max'
allows the owner to set a limit to the maximum sound output to prevent noise
disturbance.
To enter the
Hotel Menu press & hold the GREEN button on the remote for about 5 seconds,
the Hotel menu will appear at the bottom of the screen.
the Hotel menu will appear at the bottom of the screen.
Turn ON to
disable RF channel tuning facility.
set value
between 0 and 100 to limit the sound output available from speaker set the
desired input or channel that will appear at switch on.
Use P+ / P- to select item and Vol+ / Vol- to change data.
Option Menu
This menu is
used to enable or disable certain functions availible in the bios.
To enter the Option menu press and hold the GREEN button on the remote for about 5 secs, first the HOTEL menu will appear. Now press and hold GREEN for a further 5 secs, now the OPTION menu
will appear. Only the highlighted items may be accessed by the user.
To enter the Option menu press and hold the GREEN button on the remote for about 5 secs, first the HOTEL menu will appear. Now press and hold GREEN for a further 5 secs, now the OPTION menu
will appear. Only the highlighted items may be accessed by the user.
Use P+ / P- on the remote to highlight the
desired item, then use Vol+ / Vol-- to
change the state.
Other Menu
This menu
contains some items that should not normally require adjustment.
Use P+ / P- to select item & Vol+ / Vol-to change value.
ADC Calibration
The ADC ADJ
menu is accessible from the main service menu.
ADC
calibration is performed automatically by pressing Vol + key whilst the ADC menu is displayed.
A test
signal of RGB colour bars must be applied to the SCART input for this
adjustment to be performed. If the result is successful, OK will be displayed
at the bottom of the OSD.
It is not
possible to manually adjust these values.
Press Vol +to begin auto Calibration.
This
adjustment is not required for the CCTV model.
Color Temperature
The Color
Temperature menu is accessible from the main service menu and is used to adjust
the pictures' white balance.
Connect a
100% white test signal to either SCART or Aerial input and set picture mode to
STANDARD
Enter the service mode & select Color Temperature option.
Enter the service mode & select Color Temperature option.
Keeping one color
constant, adjust R, G, B Gain value to achieve a pure white image.
If a
suitable color analyzer is available adjust the co-ordinates to X= 0.290, Y=
0.290 (+/- 0.01).
If the Grey
scale suffers from a predominant tint use the R, G, B Offset adjustment to neutralize,
in this case the white level adjustment should be re-checked.
Use P+ / P- to select item and Vol+ / Vol- to change value.
Picture Mode
The
predetermined settings for the fixed picture modes can be adjusted using this
Menu.
Select the PIC Mode desired to be changed using P+ / P- and Vol+ / Vol-change the value as required.
Select the PIC Mode desired to be changed using P+ / P- and Vol+ / Vol-change the value as required.
Source: SCART
PIC Mode: Standard
Contrast 42
Brightness 48
Color 45
Sharpness 42
PIC Mode: Standard
Contrast 42
Brightness 48
Color 45
Sharpness 42
Text Brightness
The three
predetermined levels set for Teletext brightness control can be adjusted in
this menu.
Use P+ / P- to select item & Vol+ / Vol-to change value.
MAX 63
MID 42
MIN 21
MID 42
MIN 21
Factory Reset
In certain circumstances it might be useful to restore the memory
to the default conditions
preset within the system bios.
To do this enter the main factory menu and select the "Factory Reset" option.
Press vol+ to proceed with the initialization.
This reset does not affect the ADC calibration or the White balance adjustment settings,
nor does it clear the stored RF channels.
preset within the system bios.
To do this enter the main factory menu and select the "Factory Reset" option.
Press vol+ to proceed with the initialization.
This reset does not affect the ADC calibration or the White balance adjustment settings,
nor does it clear the stored RF channels.
OPTIONS & SETTINGS
The table below shows the correct factory settings for this model.
Some of these items may need to be restored if a ‘Factory Reset’ is performed.
Some of these items may need to be restored if a ‘Factory Reset’ is performed.
