BlackBerry Storm 9530: Have a cracked screen? Need to replace your
speaker? Etc? Well just follow these steps.
Turn
your Storm where the battery door is facing up.
Remove
the battery door.
Remove the battery.
Remove the battery.
Remove
the two hex screws as shown by the SIM card slot.
Remove
the plastic piece that covers the camera & flash on the back . This is held
in with some tape so use a safe pry tool.
Remove
the two hex screws underneath it.
Turn
the phone over and remove the plastic cover under the buttons as shown.
Remove
the 2 screws underneath.
Go
around your device with the plastic pry tool, there a 3 clips on each side of
the housing.
There
is a connection for the antenna from the front to mid housing. Remove it with a
pry tool if it does not come off by itself.
You
now have 3 pieces. The rear, mid , & front housing.
To
remove the screen gently pry up this ribbon cable with a pry tool.
To
remove the main board from the mid housing disconnect the ribbon cable as
pictured.
Now
follow in reverse order for reassembly.
