TROUBLESHOOTING AND
ERROR MESSAGES
* Unit does not operate
when Standby switch • No AC power • Make certain AC power cord is plugged into
a live outlet or remote Power-On is pressed • Check to see whether AC outlet is
switch-controller.
• Main Power Switch is
off • Turn on Main Power
Remote does not function
• Wrong deck selected • Press the CDP Button
to control the Play Deck ; press the CDR Button to control the Record Deck.
• Dead batteries •
Replace both batteries
• Sensor blocked •
Remove obstructions from front panel or connect a remote sensor to the
Remote-In Jack.
Disc does not erase •
CD-R disc in use • CD-R discs do not erase; only CD-RW discs may be erased.
Recorded CD-R disc does
not play in another CD player or DISC ERROR message appears in play deck, • CD-R disc not finalized. • Finalize the CD-R disc in the CDR 26’s
record deck.
Recording suddenly stops
• Input source stopped or paused. •
Recordings will stop when the input source is paused for more than three
seconds for digital recordings and 10 seconds for analogue recordings.
ERROR MESSAGES
CHECK DISC. • A record-related button has been pressed
when a finalized disc is in the Record Deck.
• A record-related button has been pressed when a standard CD is in the
Record Deck. • Un-finalize the disc to add tracks to a CD-RW disc. • Replace the disc with a blank CD-R or CD-RW
disc. • Replace the disc with a blank
CD-R or CD-RW disc.
DATA DISC • A non-audio CD-ROM or a CD Video disc has
been placed in the machine. • Only CD
Audio and DTS® discs will play in the CDR 26;
replace the disc.
DISC ERROR • An un-finalized
disc has been placed in the Play Deck. •
A DVD has been placed in the unit. • Finalize the disc. • Replace the disc; the
CDR 26 does not play or dub DVDs.
DISC FULL • There are
only four seconds of record time remaining on the disc being recorded. • Use another blank CD-R or CD-RW disc. • Erase one or more tracks on a CD-RW disc.
ERROR • The disc is not
seated properly. • There is a
problem with the disc. • Open the drawer
and check to see that the disc is properly seated. • Try another disc.
FAILED • A dub has not
been completed properly. • Check the play disc,
• Repeat the dub process.
NO AUDIO • A
record-related button has been pressed when a non-audio disc is in the Record
Deck. • Replace the disc with a blank
CD-R or CD-RW Audio disc,
SVC-1 • There is an internal problem with the CDR 26. • Contact an authorized Harman Kardon service center.
.
POWER CIRCUIT DIAGRAM
CD-P schematic
CD-RW CIRCUIT DIAGRAM
CD-R RF CIRCUIT DIAGRAM
CD-R, µ-COM/DSP CIRCUIT DIAGRAM
I/O CIRCUIT DIAGRAM
FRONT CIRCUIT DIAGRAM
No comments:
Post a Comment