Step
by step disassembling procedure of HP ENVY 14 –– How to remove the keyboard – How to remove the
top cover – How to remove the battery
How
to remove Battery
Before disassembling the
computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
Remove the battery:
1. Slide the battery cover release latch (1). (The battery cover releases forward (2)).
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
Remove the battery:
1. Slide the battery cover release latch (1). (The battery cover releases forward (2)).
2. Remove the battery cover.
The battery cover is included in the Door Kit, spare part numbers 608384-001
(for use only with standard computer models) and 629879-001 (for use only with
Beats Edition computer models)
3. Slide the right battery
release latch (1) to unlock the battery.
4. Slide and hold the left
battery release latch (2) to release the battery.
5. Pull the battery tab (3), and then remove the battery from the computer.
5. Pull the battery tab (3), and then remove the battery from the computer.
How
to remove SIM
Before removing the SIM, follow
these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
Remove the memory module:
1. Press in on the SIM (1) to release it from the SIM slot.
2. Remove the SIM (2) from the SIM slot.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
Remove the memory module:
1. Press in on the SIM (1) to release it from the SIM slot.
2. Remove the SIM (2) from the SIM slot.
How
to remove Mass storage device
Before removing the mass storage
device, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
Remove the mass storage device:
1. Remove the four Phillips PM2.0×3.0 screws that secure the mass storage device to the computer.
1. Remove the four Phillips PM2.0×3.0 screws that secure the mass storage device to the computer.
2. Use the Mylar
tab (1) to slide the mass storage device to the right and disconnect
it from the system board.
3. Lift the mass storage
device (2) out of the mass storage device bay.
How
to remove WWAN module
Before removing the WWAN module,
follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
5. Remove the hard drive
Remove the WWAN module:
1. Disconnect the WWAN antenna cables from the terminals on the WWAN module.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
5. Remove the hard drive
Remove the WWAN module:
1. Disconnect the WWAN antenna cables from the terminals on the WWAN module.
2. Remove the two Phillips
PM2.0×3.0 screws that secure the WWAN module to the system board. (The WWAN
module tilts up.)
3. Remove the WWAN module by
pulling the module away from the slot at an angle.
How
to remove RTC battery
Before removing the RTC battery,
follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
5. Remove the memory module/wireless module compartment cover
Remove the RTC battery:
1. Disconnect the RTC battery cable from the system board.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
5. Remove the memory module/wireless module compartment cover
Remove the RTC battery:
1. Disconnect the RTC battery cable from the system board.
2. Remove the RTC battery
from the system board. The RTC battery is attached to the system
board with double-sided tape.
How
to remove Top cover
Before removing the top cover,
follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
5. Remove the memory module/wireless module compartment cover
Remove the top cover:
1. Remove the eight Phillips PM2.5×7.0 screws that secure the top cover to the computer.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
5. Remove the memory module/wireless module compartment cover
Remove the top cover:
1. Remove the eight Phillips PM2.5×7.0 screws that secure the top cover to the computer.
2. Remove the three Phillips
PM2.0×3.0 screws that secure the top cover to the computer in the battery bay.
3. Turn the computer right
side up, with the front toward you.
4. Open the computer as far
as it will open.
5. Lift the front edge of top cover (1) until the TouchPad cable is accessible.
6. Release the ZIF connector to which the TouchPad cable is attached, and then disconnect the cable
(2) from the system board.
5. Lift the front edge of top cover (1) until the TouchPad cable is accessible.
6. Release the ZIF connector to which the TouchPad cable is attached, and then disconnect the cable
(2) from the system board.
7. Slide the top
cover (1) forward until the power button board cable, keyboard cable,
and keyboard light cable are accessible.
8. Release the power button
board cable (2) from the fan surface. (The power button board cable
is attached to the fan surface with double-sided tape.)
9. Disconnect the power button board cable (3) from the system board.
10. Release the ZIF connector to which the keyboard light cable is attached, and then disconnect the
cable (4) from the system board.
9. Disconnect the power button board cable (3) from the system board.
10. Release the ZIF connector to which the keyboard light cable is attached, and then disconnect the
cable (4) from the system board.
11. Release the ZIF
connector to which the keyboard cable is attached, and then disconnect the cable
(5) from the system board.
(5) from the system board.
How
to remove Keyboard
Before removing the keyboard,
follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
5. Remove the memory module/wireless module compartment cover
6. Remove the top cover
Remove the keyboard:
1. Turn the top cover upside down, with the front toward you.
2. Press on the back of the keyboard (1) through the opening in the top cover until the keyboard disengages from the top cover.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery
5. Remove the memory module/wireless module compartment cover
6. Remove the top cover
Remove the keyboard:
1. Turn the top cover upside down, with the front toward you.
2. Press on the back of the keyboard (1) through the opening in the top cover until the keyboard disengages from the top cover.
3. Release the keyboard
light cable (2) and the keyboard cable (3) through their
respective openings in the top cover.
4. Turn the top cover and
keyboard right-side up, with the front toward you.
5. Swing the rear edge of
the keyboard (1) up and forward until it rests at an angle.
6. Slide the keyboard (2) back at an angle until the tabs on the front edge of keyboard disengage from the slots in the top cover.
6. Slide the keyboard (2) back at an angle until the tabs on the front edge of keyboard disengage from the slots in the top cover.
No comments:
Post a Comment