Samsung Galaxy
Tab 3 7.0: DISASSEMBLING PROCEDURE
How
to remove the battery Battery
With
a plastic opening tool, gently insert the prying end in between the glass
digitizer and the silver frame from the front of the device.
Working
slowly and carefully, move around the entirety of the face of the device. Small
plastic clips should release, if not, apply gentle outwards pressure until you
hear the clips popping off.
To
begin actual removal of the battery itself, remove the four designated screws
with your screwdriver. Once the screws are removed, use either the tip of your
screwdriver or a pair of tweezers to pull up the battery connector. Pull
directly up and the connector should pop out. Once the battery is removed, it
should look as it does in the third picture.
To
finish battery replacement, place your new battery where the old battery was in
your device, as shown in the picture.
Begin
replacement of the motherboard by releasing all connections holding down the
motherboard, shown in the first picture. To do this, use your spudger,
tweezers, or a plastic opening tool and gently lift the connections up from
their ports. Once you separate all connections, the back of your device should
look as it does in the third picture.
Once
all connections have been released, begin removing the screws shown in the
first two pictures. Once all screws have been removed, the motherboard can now
be removed and replaced with a new one.
