PlayStation Vita
Power off and remove the memory
card. Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back
casing.
Using your fingernail or a
spudger, pry open the accessory port cover on the top of the device. Using a
Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the
accessory port cover.
Remove the two 5.4mm Phillips #00
screws on the bottom of the device near the charging port.
Beginning at the sides of the
device, use a plastic opening tool to separate the front and rear cases.
Continue working your way around the device gently prying it open. There are
still wires holding the front and rear cases together. You may damage the
connections if you yank the cases completely apart.
Gently separate the two cases,
minding the battery and the touch screen controller connectors holding the two
cases together.
Using a spudger, free the touch
screen controller flex cable by gently prying up the connection.
Free the battery cable by gently
prying up on the connection with a spudger. Separate the front and rear cases.
With the help of a spudger,
gently pry off and remove the battery cable retainer on the back casing
assembly.
The easiest access to the battery
cable retainer is where the battery cable comes out.
Using your finger or a spudger,
lift the battery out and remove it. Guide the battery wires through the hole in
the back casing as you remove the battery.
