Used transistors: KSC340, TIP41C, TIP42C2N5551, BC558
Click on the schematic to magnify
All
the components are easily available at most of the electronic spare part
market. The components are not costly
too. When you select the mains transformer, go for a good quality one, which
determines the quality of sound from the amplifier. If you use a Torroidal type transformer, will
be better. Even though it will cost
more, it will give good results.
Select
a transformer having not less than 3Amps secondary current.
The
power transistors should be fitted on suitable heat-sink to prevent
overheating. Use of heat-sink compound
is highly recommended.
Keep
all the inter-connection wires as short as possible. Use a metal cabin to assemble this amplifier.
The
amplifier can be used with multi signal inputs.
You can note it by its input board sockets.
It
will be best to use a high-capacity main filter capacitor. 5000MFD 60V will be better.
Come
on. Go with the circuit first, and then start
your first amplifier project.
