TH-S11
TEST MODE
This player
has a TEST MODE for product QC, service or repair.
Contents as
follows. If the DVD TRAY is not completely closed, supply AC power and press
POWER ON to close the TRAY.
After confirm
that the TRAY is completely closed go to standby.
Once LED
lights up, pull off the power plug. Reinsert the AC power plug to the outlet
while pressing, “POWER" and "STOP" button at the front panel of
the set.
TEST MODE has
the 7 different steps. Press MENU key on the remote control to change the
steps.
TEST MODE is
canceled by the POWER key.
How
to repair after carried out full-initialize
(1) Learning
DVD
playback
VT-501
(2) Learning
CD
playback
CTS-1000
(3) standby
mode (push power key)
(4) Checking
BCA
insert V-2805
test mode
(press POWER and STOP button together during AC power plug in)
check mode
(press menu key of remote controller)
BCA check
(press +10 key of remote controller)
FL indication
change "0000 0000" to "0000 0001" and Disc auto stop
(5) standby mode
(push power key)
REGION
CODES
Tray
lock-Unlock
You can lock
the tray and prohibit the unwanted disc ejection.
On the center
unit ONLY:
While the
system is on standby mode, press EJECT with STOP pressed and held.
The system
turns on and “LOCKED” appears on the display window.
If you try to eject the disc, “LOCKED” appears
to indicate that the tray is locked.
To cancel
Carry out the
same operation again.
The system turns on and “UNLOCKED” appears on the
display window.
Schematic
diagram: Transformer section
Regulator
section
Micon
section
Audio
section
Video
section
Front
section
DVD
servo control section
DVD
servo control section (2/2)
No comments:
Post a Comment