Monday, 10 August 2020

How to disassemble Beko B13 B7S B7SLED washing machine- Front door and exterior door

 

Disassembly of shock absorber, upper table, front door and exterior door

Equipment needed for disassembly and assembly.

Shock Absorber Pin Punching Apparatus

Before the shock absorber is punched into its place, practice is performed at the bushings.

Shock absorber is attached onto the bracket and drum.

Only softener is applied onto the shock absorber pins.

Pin is attached onto it.

Punching gun is seated onto the bracket and pin.

Punching gun is squeezed and assembly is completed.

Punching gun is squeezed to the very end and assembly is completed.

It will be checked after assembly.

Upper Table Assembly - Disassembly

Two sheet metal screws fixing the upper table to the body are removed.
Upper table is removed by being lifted to backwards and then upwards.

Two screws shown in Picture are removed.

Upper table is pulled back and removed from the tabs which are shown.

Front Door Group Assembly/Disassembly

Front door is opened.
Two screws of the hinge holder that serves as front door holder by the hinge are unscrewed and the holder is removed. Front door is separated from the hinge.
Two hinge screws fixing the hinge to the front door are removed and hinge is removed from the front door.

Exterior Door

The bolts connecting the exterior door and interior door are removed.

Exterior door will be removed from the interior door manually.


No comments:

Post a Comment

LG 52LG50FD, 52LG50FD-SA-Service adjustments-service mode entry-white balance adjustment-ADC component 1 RGB adjustment and more

  These adjustments are similar to 42LB7DF Because this is not a hot chassis, it is not necessary to use an isolation transformer. However...