Huawei u7519: DISASSEMBLING
PROCEDURE
Take
off the back covering of the phone along with the battery and SIM card.
The
SIM card is located above the battery.
Using
the Phillips #00 Screwdriver, take out the four small screws located at the
four corners of the phone. Save the screws. They will be needed for reassembly.
Using
the same screwdriver, take out the two bigger screws located on each side of
the battery compartment. NOTE: Save the screws. They will be needed for
reassembly.
Once
all the screws are removed, use the iPod opening tool to pry off the back
covering of the phone along the edge of the back cover and you will have access
to the motherboard. Note: The power and volume buttons will fall out of the
phone. Set aside for reassembly.
Carefully
pull the backing of the phone from the motherboard with your hands.
To
remove front case from the motherboard, first pull back the silver tab
(highlighted in blue) and the orange tab (highlighted in red).
Once
the silver and orange tabs are pulled back, carefully pull the motherboard
apart from the front case.
For
reassembly: Place the new motherboard on the front case.
Snap
the tabs back into place. Replace back casing and snap in place.
Screw in screws. Note: you can also follow these steps in reverse, which is the same process as outline above. Note: replacing the power and volume buttons may be tricky. For ease, use tweezers. You have now successfully replaced the screen for the phone.
Screw in screws. Note: you can also follow these steps in reverse, which is the same process as outline above. Note: replacing the power and volume buttons may be tricky. For ease, use tweezers. You have now successfully replaced the screen for the phone.
